CMSGHA647A - Aluminium Anode - for use in salt and brackish water.

CM41107ZW1B01ZA - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 73.66mm (2.900in)
Width: 111.76mm (4.400in)
Depth: 73.66mm (2.900in)
Categories: Outboard Anodes, Trim Tab Anode, Martyr Anodes,...

CM6G14525102A - Aluminium Anode - for use in salt and brackish water.
Yamaha anode 6G1-45251-02 for 6 to 8 HP UP TO 1989
Dimensions:
Length: 78.74mm (3.100in)
Width: 30.48mm (1.200in)
Depth: 6.10mm (0.240in)
Categories...

CM41109ZW1B00A - Aluminium Anode - for use in salt and brackish water.
Mounts on each side of the extension case, two (2) required per engine.
Fits Honda Outboard Models:
• 1999 BF115AX, 1999 BF130AX
• 2000 BF115AY, 2000...

CMSGVT447A - Aluminium Anode - for use in salt and brackish water.

Aluminum anode for bow thruster models BOW 220 / 230 / 285 / 310. (All thrusters have a 300mm diameter tunnel.)

CME3S - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an...

CMSGVT459A - Aluminium Anode - for use in salt and brackish water.

Anode for older bow thruster models BOW 23A, 50, 80, and many stern thrusters. (Note: Model 23 does not have an anode.)

5007582

Gearbox Anode Kit

Suits Johnson & Evinrude 20-35 HP 1991 thru both 2 cyl & 3cyl.

CM433580A - Aluminium Anode - for use in salt and brackish water.
• Johnson and Evinrude 50 HP - 225 HP outboards 1991 and newer.
• Transom Bracket V4, V6.
Dimensions:
Length: 175.26mm (6.900in)
Width: 35.56mm (1.400in)...

CMPNME - Magnesium Anode - for fresh water only. Not recommended for salt or brackish water.
Dimensions:
Length: 79.50mm (3.130in)
Width: 63.50mm (2.500in)
Depth: 79.50mm (3.130in)
Categories: Propeller / Shaft Anodes,...