Browse our extensive range of high quality marine products at Promt Parts

100-104101

HYDRAULIC JACK PLATE 4" ACTION SERIES

Bob’s Machine Shop’s new hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Bob’s Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat. This is a great OEM feature to help save time in rigging.

The new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.

• Pump inside jack plate
• Large powerful motor that can lift heavy outboards under full power
• Can be converted to have pump inside boat if owner desires to change styles
• Automotive grease nipples for easy lubrication
• Tension rods
• Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series)
• Pre drilled for dual side mount Power Pole brackets.
• Includes Jack plate, wiring harness, relays, rocker style switchRead more...

$3033.09 (excl GST)

Stock Qty: 4

401-100000

1" Transom spacers

401-100000 1" Transom spacers
Overview
These spacers are made out of strong aluminum alloy and machined flat on both sides.
Adding these spacers is the simplest way of getting that extra mph.
These spacers go between the transom and the engine’s mounting bracket.
In some cases they can also be installed between the jack plate and engine.
By applying the set back spacers to the transom, you are moving the center of gravity of the hull further back.
By doing this you are rebalancing the boat which allows the hull to remain at its present attitude with less trim.
Therefore, you have more power to push the boat forward rather than to hold the bow up.
• The kit comes complete with stainless steel bolts and nutsRead more...

$191.68 (excl GST)

Stock Qty: 2

401-200000

2" Transom spacers w/ 4 1/2" bolts

401-200000 2" Transom spacers w/ 4 1/2" bolts
Overview
These spacers are made out of strong aluminum alloy and machined flat on both sides.
Adding these spacers is the simplest way of getting that extra mph.
These spacers go between the transom and the engine’s mounting bracket.
In some cases they can also be installed between the jac plate and engine.
By applying the set back spacers to the transom, you are moving the center of gravity of the hull further back.
By doing this you are rebalancing the boat which allows the hull to remain at its present attitude with less trim.
Therefore, you have more power to push the boat forward rather than to hold the bow up.
• The kit comes complete with stainless steel bolts and nutsRead more...

$404.9 (excl GST)

Stock Qty: 2

100-116000

HYDRAULIC JACK PLATE 6" RACE HEAVY DUTY

Description
Bob’s New RACE SERIES jack plates are a racers dream! Available in 6 or 10 inch setback currently with more coming soon.

Silver aluminum color standard, Anodized colors available for upcharge.

The first race specific jack plate from Bob’s, and the first ever race specific vertical lift jack plate with Hydraulic options!

Action series – Pump built into plate – 6 Adjustable travel

Standard series – Remote mount pump with hoses – 6 Adjustable travel

Versa series – Manual screw jack – 6 Adjustable travel

All units can be converted to the other series if you wish at a later date.

Transom side plate with patent pending interlocking system to the side rails. Machined excess material off of plate to save weight!

Rated for 650HP race motors. For the 7 Marine motors, 600hp Merc.Read more...

$4735.41 (excl GST)

Stock Qty: 2

100-504100

MANUAL JACKPLATE 4" HEAVY DUTY

100-504100 4" Heavy Duty Versa Manual Jackplate
DETAILS
Bob’s Machine Shop’s Versa Jac jack plate line offers new technology in the Jack Plate market. The first & ONLY jack plate to offer an upgrade kit for boat owners to convert to Hydraulic when desired!
Made of high-quality, aircraft-grade, aluminum, the vesajac has the same look as Bob’s popular line of hydraulic jacks. It is rated for engines up to 300 MAX HP and sports a 4 setback. It is also easily adjustable while the boat is in the water. When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple. Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat. All BMS’s hydraulic pumps are designed to mount inside for longevity and protection from the elements. Jack plates have “limited lifetime warranty” and pumps have a 5 year warranty (excluding water damage).
This Versa Jac, Jack plate offers a 1 piece design, unlike competitors that require setback spacers to achieve the proper setback, and pre-drilled for side mount power poles.
Features:
• Lifetime warranty on structure
• Can be converted to Hydraulic if owner desires to change styles
• Automotive grease nipples for easy lubrication
• Tension rods
Made in Fl, USA
• Rated for 300HPRead more...

$2038.76 (excl GST)

Stock Qty: 2

100-604003

MANUAL JACK PLATE 4" EXTRA WIDE

Description
Bob’s Machine Shop has re engineered their world famous Versa jack for new 550+hp 1000LBS engines including V8’s. Bob’s Machine Shop’s Extreme Versa Jac jack plate line, offers new technology in the Jack Plate market.

New wider design accommodates the Verado’s wider mounting bracket.

Through innovative engineering, BMS’s new Extreme Gen3 Versa Series (TM) jack plates are their strongest yet.
Adjusting the jackplate for optimum results is easily done while the boat is in the water.
When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple.
Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat.

Predrilled for side mount shallow water anchors.Read more...

$2274.82 (excl GST)

Stock Qty: 2

100-606005

HYDRAULIC JACK PLATE 6" EXTRA WIDE

Description
6 Extreme Gen 3 ACTION series jack plate

Bob’s Machine Shop has re engineered their world famous jack plate for new 550+hp engines including V8’s.

The New Gen 3 Extreme Action is wider allowing for Verado installation without the use of spacers. The Extreme Gen 3 Action has the all in one style pump, built into the jack plate so no hoses or pump to mount inside the boat. This makes rigging the boat extremely easy!

Jack plates are no longer just for fishing boats, offshore boaters will enjoy the extra speed, and increased fuel economy from BMS’s new line. Jack plates are used to improve an outboard boats speed, holeshot, fuel efficiency, and the boater navigate in shallow waters.

Includes Jack plate, wiring harness, relays, rocker style switchRead more...

$3791.36 (excl GST)

Stock Qty: 2

202-100000

Outboard Motor Flusher suits Bob's Nose cone

202-100000 FRESH WATER FLUSHING KIT
Overview
• Designed specifically for all Bobs nose cone kits with low water pick-up.
• Can only be used on BOBS low water pick ups.
• Attaches to garden hose.
• Will not scratch or mark (made of durable, soft urethane construction, not fiberglass).
• One-person operationRead more...

$114.88 (excl GST)

Stock Qty: 1

100-810000

HYDRAULIC JACK PLATE - MINI 40HP Max

- Automotive grease nipples for easy lubrication
- Tension rods
- Made in USA
- Designed for motors up to 40HP that have transom mounting clamps
- 6 of hydraulic lift
- pump mounts inside boat
- weighs 8 kilos
- 12 “/30cm OAL
- 13 1/4/33cm OAW
- 6/15cm set back.Read more...

$2934.36 (excl GST)

Stock Qty: 1

100-701100

TRIM & TILT UNIT- SUITS <40HP

$100-701100 TRIM & TILT UNIT- SUITS <40HP$

100-701100

For outboard owners without factory tilt and trim, Bob’s Machine Shop has a solution. Designed for motors up to 40hp (clamp on style only), BMS’s hydraulic Tilt & Trim can provide increased performance, better handling and less hassle raising and lowering the motor at the launch ramp.

The Tilt & Trim allows boat operators to trim the boat for a smoother, drier ride. When fully trimmed in, it provides a negative 3-degree tuck-under angle for faster starts and quicker on-plane times. After reaching plane, the boat can be optimized for best running angle by trimming the tilt up to its maximum of 65 degrees. A 5-1/2 inch setback is standard.

The hydraulically operated Tilt & Trim will accommodate clamp-on motors,not standard BIA bolt pattern style. Call for questions.

The Over all mounting dimensions, which are: 10 wide by 11.5 length

BMS’s Tilt & Trim is easy to install. It comes with wiring harness, control switch.Read more...

$2085.25 (excl GST)

Stock Qty: 1

Anodes

Boating Accessories

Cooling Systems

Drive Parts

Drive Parts

Electrical

Engine Electrical

Internal Engine

Fuel Systems

Ignition Systems

Oil/Lube & Engine Care

Propellers

Rigging

Steering & Controls

Tools/Shop Supplies

Shop by Brand

You are here

100-104101

HYDRAULIC JACK PLATE 4" ACTION SERIES

401-100000

1" Transom spacers

401-200000

2" Transom spacers w/ 4 1/2" bolts

100-116000

HYDRAULIC JACK PLATE 6" RACE HEAVY DUTY

100-504100

MANUAL JACKPLATE 4" HEAVY DUTY

100-604003

MANUAL JACK PLATE 4" EXTRA WIDE

100-606005

HYDRAULIC JACK PLATE 6" EXTRA WIDE

202-100000

Outboard Motor Flusher suits Bob's Nose cone

100-810000

HYDRAULIC JACK PLATE - MINI 40HP Max

100-701100

TRIM & TILT UNIT- SUITS <40HP