B = NO PACKAGING
Contour Battery Master Switch
• Patented Contour Locking System allows
switch to be a stand alone unit, or locked
together with other switches
• Control knob can be removed by switching
to...

IS-6MM-2, INSULATED STUDS 6MM X 2 MC20
Overview
Insulated Distribution Stud, Dual 1/4" (Black)
• Made with high temperature plastic bases
• Stud covers push securely over the threaded stud covering to ABYC standards
•...

779-LBZ-1-B, Pro Installer Link Z Bar to Z Bar, 5 Pack
Overview
LINK BARS
Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save
space and allow for the...

779-LBJ-2-B, Pro Installer Link Bar, Joiner 2-Way 46-50mm, Sold Individually
Overview
LINK BARS
Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save
...

SET-1002, Label Set, Symbols, Contour 1000 Panels

IST-10MM-2S-B, INSUL STUD DBL 10mm BULK MC10
10mm Double Insulated Stud
Overview
The Pro Installer insulated studs are a smart choice for marine installers.
An increased stainless steel stud length allows up to three cable...

779-LBZ-2-B, Pro Installer Link Z Bar to Bus Bar or F-holder, 5 Pack
Overview
LINK BARS
Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save
space and...

NO PACKAGING
Inline MAXI Fuse Holder
For installations where space is tight and fuse needs to be
installed inline with the cable.
Supplied with 8 mm (8G) tails for inline connections. An economical
solution to heavy-duty...

ISC-6-2, INSULATED STUD COVER DUAL NEG BLK
Double Insulated 6mm Stud Cover
Overview
The Insulated Bus Bar Covers are designed to be a push fit, and to securely cover exposed studs and terminal lugs. Conforms to ABYC standards.

713-HB, Label for Battery Switch - House Battery
Label for Battery Switch - House Battery

713-SB, Label for Battery Switch - Start Battery
Label for Battery Switch - Start Battery

BBC-6WBK, BUSBAR COVER 6W NEG (BLK)
Buss Bar Cover - 6 Way - Negative - Black
Overview
The Insulated Bus Bar Covers are designed to be a push fit, and to securely cover exposed studs and terminal lugs.
Conforms to ABYC...

IST-8MM-1S-B, Insulated Stud Single 8mm Bulk MC10
The Pro Installer insulated studs are a smart choice for marine installers.
An increased stainless steel stud length allows up to three cable lugs to be connected, saving space,
...

777-BB4S-500, 500A 4 Stud Buss bar - MC5
Overview
Available in a broad range from 8-stud 650 Amps to 4-stud 500 Amps, Pro Installer buss bars are designed for flexibility and scalability.
The snap-out side skirts allow for...

CC-810, CC S/ ENG 3 x BATTERY SW COMBO MC3
Contour Connect 3 Batt Switch Panel with 3 Disconnects
Overview
The CC-810 Contour Connect 3 Batt Switch Panel with 3 Disconnects is supplied with standard 3 x 701-PM battery switches pre-...

NO PACKAGING
CLB Series Push Reset Thermal Circuit Breakers
• Ratings: 5–40A; 200A @ 250V AC Interrupt Capacity
• Operating Temperature: 14–140°F (-10–60°C)
• Interrupting capacity: 2500A
• Resettable overload capacity:...

770-EZ-B, Pro Installer 400A EZ-Mount On/Off Battery Switch - MC10
Overview
As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front.
Never has installation been so easy and cabling so accessible....

701, BEP 701 Battery switch
Contour Battery Master Switch
• Patented Contour Locking System allows switch to be a stand alone unit, or locked together with other switches
• Control knob can be removed by switching to counter-...

IS-10MM-2/L,
Dual Insulated Stud Module, 3/8" with Link Bar
Overview
This insulated stud is made with a high temperature plastic base.
• Made with high temperature plastic bases
• Dual studs ideal for +ve / -ve...

IST-8MM-2S-B, 8mm Double Insulated Stud
The Pro Installer insulated studs are a smart choice for marine installers.
An increased stainless steel stud length allows up to three cable lugs to be connected, saving space,
while the...