Description:
• Shieldsflex II Marine Water/Exhaust Hose (with wire) 1/2" x 12-1/2'
Key Features:
• Shieldsflex II Marine Water/Exhaust Hose has a black synthetic rubber tube and cover
• Reinforced with wire helix embedded between plies of HD synthetic cord
• Resistant to exhaust fumes, ozone, mild chemicals, antifreeze and saltwater
• Abrasion and odor permeation resistant
• It now has double the ozone resistance required by the SAEJ2006
• Shieldsflex II is primarily used for engine intake, bilge pump intake/discharge, scupper lines
• This hose is also used for wet exhaust connections (use where bends or long lengths are required)
• This hose is also used for toilet intake/discharge, and holding tank vent/pump out
• The temperature ranges from -20°F - +200°F continuous, +250°F intermittent
• Meets SAEJ2006 Type R2 standards.
Additional Details:
• Bend Radius: 5 x I.D.
• I.D.: 1/2" or 13mm
• Length: 12 1/2' or 3.8m
• O.D.: 27/32" or 21mm
• Ply: 2
• Wt. "C": 24