Browse our extensive range of high quality marine products at Promt Parts

CONTACT

$0.00

CART

NEW ZEALAND'S LARGEST MARINE PARTS STORE

SAME DAY DISPATCH: (Excludes weekends & public holidays) 11:57:09

CM41106ZW000A

ALUMINIUM HONDA Engine Ring Anode 41106-ZW-000

CM41106ZW000A - Aluminium Anode - for use in salt and brackish water.
Fits Honda 8 and 20 HP outboards.
Dimensions:
Length: 7.62mm (0.300in)
Width: 22.86mm (0.900in)
Depth: 7.62mm (0.300in)
Categories: Outboard Anodes, Ring Anode, Round Anode, Martyr Anodes, Honda AnodeRead more...

Normally: $9.91
$8.92 (excl GST)

Stock Qty: 5+

Inboard-Outboard-Sterdrive Anodes (pdf)

CME2

Zinc Engine Cooling Pencil Anode With Plug (1/2 Npt X 5/8 X 2)

CME2 - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an application where zinc is the anode material of choice. Engine manufacturers - Cummins, Yanmar, Caterpillar, etc. - still use zinc for pencil anodes.
Dimensions:
Length: 74.42mm (2.930in)
Width: 16.00mm (0.630in)
Depth: 0.00mm (0.000in)Read more...

Normally: $18.63
$16.77 (excl GST)

Stock Qty: 5+

Engine Cooling System Anodes (pdf)

CME0

Zinc Engine Cooling Pencil Anode With Plug (1/4 Npt X 3/8 X 1-3/4)

CME0 - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an application where zinc is the anode material of choice. Engine manufacturers - Cummins, Yanmar, Caterpillar, etc. - still use zinc for pencil anodes.
Dimensions:
Length: 65.28mm (2.570in)
Width: 9.65mm (0.380in)
Depth: 0.00mm (0.000in)Read more...

Normally: $10.62
$9.56 (excl GST)

Stock Qty: 5+

Engine Cooling System Anodes (pdf)

CM67F1132501A

ALUMINIUM Yamaha 75HP to 300HP Internal Anode 67F-11325-01

CM67F1132501A - Aluminium Anode - for use in salt and brackish water.
67F-11325-01 Yamaha Outboard Internal Anode
Dimensions:
Length: 32.00mm (1.260in)
Width: 22.86mm (0.900in)
Depth: 32.00mm (1.260in)
Categories: Outboard Anodes, Block Anode, Wedge Anode, Martyr Anodes, Yamaha AnodeRead more...

Normally: $9.57
$8.61 (excl GST)

Stock Qty: 5+

Inboard-Outboard-Sterdrive Anodes (pdf)

CME1

Zinc Engine Cooling Pencil Anode With Plug (3/8 Npt X 1/2 X 2)

CME1 - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an application where zinc is the anode material of choice. Engine manufacturers - Cummins, Yanmar, Caterpillar, etc. - still use zinc for pencil anodes.
Dimensions:
Length: 69.60mm (2.740in)
Width: 12.70mm (0.500in)
Depth: 0.00mm (0.000in)

Read more...

Normally: $17.39
$15.65 (excl GST)

Stock Qty: 5+

Engine Cooling System Anodes (pdf)

CME1F

Zinc Engine Cooling Pencil Anode With Plug (3/8 Npt X 1/2 X 1-1/4)

CME1F - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an application where zinc is the anode material of choice. Engine manufacturers - Cummins, Yanmar, Caterpillar, etc. - still use zinc for pencil anodes.
Dimensions:
Length: 50.80mm (2.000in)
Width: 12.70mm (0.500in)
Depth: 0.00mm (0.000in)Read more...

Normally: $19.87
$17.88 (excl GST)

Stock Qty: 5+

Engine Cooling System Anodes (pdf)

CMR02

ZINC RUDDER ANODE CMR 2 (2-13/16" trim-tab disc anode)

CMR02 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 12.70mm (0.500in)
Width: 71.37mm (2.810in)
Depth: 12.70mm (0.500in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr AnodesRead more...

Normally: $28.57
$25.71 (excl GST)

Stock Qty: 5+

Rudder & Trim Tab Anodes (pdf)

CMR03

ZINC RUDDER ANODE CMR 3 (3-3/4" trim-tab disc anode)

CMR03 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 12.70mm (0.500in)
Width: 95.25mm (3.750in)
Depth: 12.70mm (0.500in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr AnodesRead more...

Normally: $47.20
$42.48 (excl GST)

Stock Qty: 5+

Rudder & Trim Tab Anodes (pdf)

CM68V1132501A

ALUMINIUM YAMAHA INTERNAL ANODE

CM68V1132501A - Aluminium Anode - for use in salt and brackish water.
Internal anode for Yamaha crankcase. Supercedes original part number 68V-11325-00-00.
Dimensions:
Length: 33.02mm (1.300in)
Width: 22.86mm (0.900in)
Depth: 33.02mm (1.300in)
Categories: Outboard Anodes, Ring Anode, Round Anode, Martyr Anodes, Yamaha AnodeRead more...

Normally: $32.49
$29.24 (excl GST)

Stock Qty: 5+

Inboard-Outboard-Sterdrive Anodes (pdf)

CMX03

Zinc Streamlined Shaft Anode Cmx-3 (1")

CMX03 - Zinc Anode - for salt water use. Not recommended for fresh water.
• Interlocking halves
• Full shaft contact (100% circular radius)
• Extra alloy around the fastener
• Easy installation underwater
• Bolt retaining washers prevent anode from falling off.
Dimensions:
Length: 54.61mm (2.150in)
Width: 54.86mm (2.160in)
Depth: 54.61mm (2.150in)
Categories: Propeller / Shaft Anodes, Propeller Anode, Martyr AnodesRead more...

Normally: $27.33
$24.6 (excl GST)

Stock Qty: 5+

Shaft & Propeller Anodes (pdf)

CMT21

ZINC Medium Teardrop Bolt-On Hull Anode

CMT21 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 127.00mm (5.000in)
Width: 50.80mm (2.000in)
Depth: 20.32mm (0.800in)
Categories: Hull Anodes, Teardrop Anode, Martyr AnodesRead more...

Normally: $27.33
$24.6 (excl GST)

Stock Qty: 5+

Hull Anodes (pdf)

CMT20

ZINC Small Teardrop Bolt-On Hull Anode

CMT20 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 86.36mm (3.400in)
Width: 45.72mm (1.800in)
Depth: 15.24mm (0.600in)
Categories: Hull Anodes, Teardrop Anode, Martyr AnodesRead more...

Normally: $13.10
$11.79 (excl GST)

Stock Qty: 5+

Hull Anodes (pdf)

CMX08

Zinc Streamlined Shaft Anode (1-3/4")

CMX08 - Zinc Anode - for salt water use. Not recommended for fresh water.
• Interlocking halves
• Full shaft contact (100% circular radius)
• Extra alloy around the fastener
• Easy installation underwater
• Bolt retaining washers prevent anode from falling off.
Dimensions:
Length: 69.85mm (2.750in)
Width: 82.55mm (3.250in)
Depth: 69.85mm (2.750in)
Categories: Propeller / Shaft Anodes, Propeller Anode, Martyr AnodesRead more...

Normally: $67.09
$60.38 (excl GST)

Stock Qty: 5+

Shaft & Propeller Anodes (pdf)

CMX09

Zinc Streamlined Shaft Anode (2")

CMX09 - Zinc Anode - for salt water use. Not recommended for fresh water.
• Interlocking halves
• Full shaft contact (100% circular radius)
• Extra alloy around the fastener
• Easy installation underwater
• Bolt retaining washers prevent anode from falling off.
Dimensions:
Length: 73.66mm (2.900in)
Width: 91.44mm (3.600in)
Depth: 73.66mm (2.900in)
Categories: Propeller / Shaft Anodes, Propeller Anode, Martyr AnodesRead more...

Normally: $77.01
$69.31 (excl GST)

Stock Qty: 5+

Shaft & Propeller Anodes (pdf)

CM875821Z

ZINC VOLVO PENTA ANODE (Duo-prop ring)

CM875821Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 144.78mm (5.700in)
Width: 144.78mm (5.700in)
Depth: 30.48mm (1.200in)
Categories: Sterndrive Anodes, Ring Anode, Round Anode, Martyr Anodes, Volvo Penta AnodeRead more...

Normally: $44.71
$40.24 (excl GST)

Stock Qty: 5+

Volvo Penta Anodes (pdf)

CMEZ1F

Zinc Engine Cooling System Pencil Anode Replacement (3/8 Unc X 1/2 X 1-1/4)

CMEZ1F - Zinc Anode - Replacement pencil anodes thread into your existing pencil anode brass plug(s).
Dimensions:
Length: 44.45mm (1.750in)
Width: 9.65mm (0.380in)
Depth: 0.00mm (0.000in)Read more...

Normally: $5.94
$5.35 (excl GST)

Stock Qty: 5+

Engine Cooling System Anodes (pdf)

CMVM20PZ

ZINC VM Engine Anode w/Plug D14x20-M18x1.5

CMVM20PZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 20.07mm (0.790in)
Width: 13.97mm (0.550in)
Depth: 0.00mm (0.000in)
Categories: Inboard / Jet Anodes, Engine Cooling System Anode, Martyr Anodes, VM Motori AnodeRead more...

Normally: $45.03
$40.53 (excl GST)

Stock Qty: 5+

Engine Cooling System Anodes (pdf)

CME3

Zinc Engine Cooling Pencil Anode With Plug (3/4 Npt X 3/4 X 2)

CME3 - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an application where zinc is the anode material of choice. Engine manufacturers - Cummins, Yanmar, Caterpillar, etc. - still use zinc for pencil anodes.
Dimensions:
Length: 76.45mm (3.010in)
Width: 19.05mm (0.750in)
Depth: 0.00mm (0.000in)Read more...

Normally: $26.09
$23.48 (excl GST)

Stock Qty: 5+

Engine Cooling System Anodes (pdf)

CMX07

Zinc Streamlined Shaft Anode (1-1/2")

CMX07 - Zinc Anode - for salt water use. Not recommended for fresh water.
• Interlocking halves
• Full shaft contact (100% circular radius)
• Extra alloy around the fastener
• Easy installation underwater
• Bolt retaining washers prevent anode from falling off.
Dimensions:
Length: 63.50mm (2.500in)
Width: 70.61mm (2.780in)
Depth: 63.50mm (2.500in)
Categories: Propeller / Shaft Anodes, Propeller Anode, Martyr AnodesRead more...

Normally: $39.90
$35.91 (excl GST)

Stock Qty: 5+

Shaft & Propeller Anodes (pdf)

CMR04

ZINC RUDDER ANODE (5" trim-tab disc anode)

CMR04 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 16.51mm (0.650in)
Width: 127.00mm (5.000in)
Depth: 16.51mm (0.650in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr AnodesRead more...

Normally: $86.96
$78.26 (excl GST)

Stock Qty: 5+

Rudder & Trim Tab Anodes (pdf)

Anodes

Boating Accessories

Cooling Systems

Drive Parts

Drive Parts

Electrical

Engine Electrical

Engine Parts

Fuel Systems

Ignition Systems

Oil/Lube & Engine Care

Propellers

Rigging

Steering & Controls

Tools/Shop Supplies

Shop by Brand

You are here

CM41106ZW000A

ALUMINIUM HONDA Engine Ring Anode 41106-ZW-000

CME2

Zinc Engine Cooling Pencil Anode With Plug (1/2 Npt X 5/8 X 2)

CME0

Zinc Engine Cooling Pencil Anode With Plug (1/4 Npt X 3/8 X 1-3/4)

CM67F1132501A

ALUMINIUM Yamaha 75HP to 300HP Internal Anode 67F-11325-01

CME1

Zinc Engine Cooling Pencil Anode With Plug (3/8 Npt X 1/2 X 2)

CME1F

Zinc Engine Cooling Pencil Anode With Plug (3/8 Npt X 1/2 X 1-1/4)

CMR02

ZINC RUDDER ANODE CMR 2 (2-13/16" trim-tab disc anode)

CMR03

ZINC RUDDER ANODE CMR 3 (3-3/4" trim-tab disc anode)

CM68V1132501A

ALUMINIUM YAMAHA INTERNAL ANODE

CMX03

Zinc Streamlined Shaft Anode Cmx-3 (1")

CMT21

ZINC Medium Teardrop Bolt-On Hull Anode

CMT20

ZINC Small Teardrop Bolt-On Hull Anode

CMX08

Zinc Streamlined Shaft Anode (1-3/4")

CMX09

Zinc Streamlined Shaft Anode (2")

CM875821Z

ZINC VOLVO PENTA ANODE (Duo-prop ring)

CMEZ1F

Zinc Engine Cooling System Pencil Anode Replacement (3/8 Unc X 1/2 X 1-1/4)

CMVM20PZ

ZINC VM Engine Anode w/Plug D14x20-M18x1.5

CME3

Zinc Engine Cooling Pencil Anode With Plug (3/4 Npt X 3/4 X 2)

CMX07

Zinc Streamlined Shaft Anode (1-1/2")

CMR04

ZINC RUDDER ANODE (5" trim-tab disc anode)

Subscribe to our newsletter

Company

Engine Diagrams

Technical Information

Product Information

Connect with Us