• Shields Series 368 Low Permeation Marine Fuel Hose 3/8" x 250 FT
Key Features:
• Has a plastic barrier veneer with an NBR outer layer tube to prevent permeation
• Reinforced hose complies w/ EPA & CARB very low...

• Fuel Water Separator Filter (Spin On Replacement)
Key Features:
• Allow water to be drained from the filter to extend service life
• USCG regulations require the use of the flame resistant metal collection bowl below deck...

• 10 Micron Replacement Filter
Key Features:
• Ethanol blended fuel absorbs more water and loosens more particulates than regular fuels
• Proper filtration is required for every horsepower engine
• Sierra's 10 micron...

• Shields Series 368 Low Permeation Marine Fuel Hose 1/2" x 250 FT
Key Features:
• Has a plastic barrier veneer with an NBR outer layer tube to prevent permeation
• Reinforced hose complies w/ EPA & CARB very low...

• S/S TO 116-351-1120
Key Features:
• Resists gasoline/alcohol blends & has a corrugated cover for extra flexibility
• Compounded for low permeation & is reinforced w/ a helix embedded between plies of HD synthetic...

• Shields Fire-Acol Fuel Vent Hose 5/8" x 250 FT
Key Features:
• Shields Fire-Acol Fuel Vent hose resists gasoline/alcohol blended fuel and is fire resistant
• Features a weather/UV resistant NBR/PVC cover
• This...

• Shields Series 368 Low Permeation Marine Fuel Hose 5/16" x 250 FT
Key Features:
• Has a plastic barrier veneer with an NBR outer layer tube to prevent permeation
• Reinforced hose complies w/ EPA & CARB very low...

• Shields Sternflex 2" x 50 FT
Key Features:
• Has a polyethylene co-polymer wall with an integral polyethylene helix
• Resistant to abrasion, crushing and UV
• Primarily used to cover harness and bracket mounted...

• Silverado 4000 Outboard Fuel Line 3/8" x 250 FT
Key Features:
• The series 337 fuel lines (Silverado 4000) is the best B1 fuel line in the market place
• THV500 barrier layer, a Nitrile jacket, Polyester reinforcement and a...

• Impeller
Additional Details:
• For: Alpha I-Generation 2 s/n D494569 & above Mercruiser Vazer
• For: 30/40/45/50/60 4-stroke Bigfoot, 60 (3cyl) Bigfoot, 75-125 (all 3 & 4 cyl models) A996142 & Up
•...

• 10W-30 FC-W 4-Stroke Outboard Oil (Gallon) (3.785L)
Key Features:
• Highly refined petroleum product formulated with premium base stock and highly refined additives
• Formulated to meet or exceed the tough requirements of...

• 10 Micron Replacement Filter (OMC thread)
Additional Details:
• Rating: 10 Micron
Interchange:
Johnson/Evinrude Outboard
• 0502905
OMC Stern Drive
• 0174144

• TC-W3 Premium Blend (Quart) (12 per case) (946ml)
Key Features:
• High performance lubricant
• Designed and manufactured to meet and exceed all engine manufacturers warranties
• Exceeds JASO, ISO, API, and NMMA for...

• 25W-40 FC-W Synthetic Blend Oil (5 Quart)(4.7L)
Key Features:
• 4-cycle oil blended with premium grade synthetic and mineral based stock
• Superior designed additives formulated for the stress endured by sterndrive and...

• Stainless Steel Locknut
Key Features:
• Package of 6
Additional Details:
• For: MR/Alpha
• For: MCM inner transom studs and prop nut for Mercury 39, 60 (1968 & Newer, 8 spline)
• Material:...

• S/S TO 118-4911
Additional Details:
• Length: 200' or 61m
• Size: 5/32" or 4mm
Interchange:
Johnson/Evinrude Outboard
• 0322236
• 0772577

• Cotter Pin
Additional Details:
• Size: 5/32 x 1 3/8" or 4 x 35mm
Interchange:
Yamaha Outboard
• 91401-40025-00
• 91401-40028-00
• 91401-40030-00
• 91490-40025-00
• 91490-40030-...

• Oil Filter
Key Features:
• Anti-Drain-Back Valve
• Engineered with premium grade materials that will excel in the extreme marine environment
• Epoxy coated for corrosion resistance
• Heavy-wall steel...

• S/S TO 118-4913
Additional Details:
• Length: 200' or 61m
• Size: 3/16" or 4.8mm
Interchange:
Johnson/Evinrude Outboard
• 0316705
• 0772578