CM6E51132500Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 27.94mm (1.100in)
Width: 10.16mm (0.400in)
Depth: 10.16mm (0.400in)
Categories: Outboard Anodes, Block Anode, Wedge Anode...

CM6J81132500A - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 40.89mm (1.610in)
Width: 16.00mm (0.630in)
Depth: 40.89mm (1.610in)
Categories: Outboard Anodes, Engine Cooling System Anode, Martyr...

CM8M0039340KITA - Aluminium Anode - for use in salt and brackish water.
Fits Mercruiser Zeus POD Drives
This kit contains:
• CM8M0039340 x 2
• Mounting hardware
Dimensions:
Length: 0.00mm (0.000in)
Width: 0....

CM15539500Z - Zinc Anode - for salt water use. Not recommended for fresh water.
For Gori 3-blade 18" and 20" saildrive propellers.
Dimensions:
Length: 33.02mm (1.300in)
Width: 93.98mm (3.700in)
Depth: 33.02mm (1.300in)
...

CMY200250KITA - Aluminium Anode - for use in salt and brackish water.
Fits Yamaha 200-250 HP Outboards
This kit contains:
• CM6G54525101 Yamaha Outboard Handle Bar Anode (6G5-45251-02)
• CM61A4537100 Yamaha Outboard Trim...

CMPNZE - Zinc Anode - for salt water use. Not recommended for fresh water.
• Fasteners are included with all replacement prop nuts.
• Nylon patch is good for one initial application only.
• Please use lock tite or teflon tape to...

CMR02M - Magnesium Anode - for fresh water only. Not recommended for salt or brackish water.
Dimensions:
Length: 12.70mm (0.500in)
Width: 71.37mm (2.810in)
Depth: 12.70mm (0.500in)
Categories: Rudder / Trim Tab Anodes,...

CM806105Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Alpha I Generation II Engine
Dimensions:
Length: 83.82mm (3.300in)
Width: 83.82mm (3.300in)
Depth: 22.86mm (0.900in)
Categories: Sterndrive...

CMALPHAKITZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Fits 1991 and newer Mercruiser Alpha One Gen II drives
This kit contains:
• CM762145 Mercury/Mercruiser Flat Trim Tab Aluminum Anode
•...

CMMP70RA - Aluminium Anode - for use in salt and brackish water.
Designed for 1-1/4" to 1-3/8" (30 mm to 35 mm) shafts
Screw holes are 2" center to center
Height: 1-3/4"
Outside Diameter: 2-5/8"
Fastener: 5 mm x 0.8 mm x 20...