CME1H - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an...

CMSGSP626A - Aluminium Anode - for use in salt and brackish water.

For thrusters with 215mm, 250mm, or 300mm tunnel diameter.
Fits models SP125, SP155, SP240, SP285, SE120, SEP120, SE130, SEP130, SE150, SEP150, SE170, SEP170, SE210,...

CM43396A - Aluminium Anode - for use in salt and brackish water.
Transom mounted anode with large surface area for additional corrosion protection of outboards and outdrive.
Dimensions:
Length: 15.24mm (0.600in)
Width: 192.02mm (...

CM5032929A - Aluminium Anode - for use in salt and brackish water.
Fits Suzuki (and Johnson/Evinrude) outboards: DF60-DF140, 1998 and later
Dimensions:
Length: 66.04mm (2.600in)
Width: 73.66mm (2.900in)
Depth: 66.04mm (2....

CM5532194900A - Aluminium Anode - for use in salt and brackish water.
Mounts on bottom of stern bracket.
Fits the following Suzuki outboards:
DF60 - DF300 2001 and later
DT115 - DT140 1996-2001
Dimensions:
Length: 195....

CMR04AL - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 16.51mm (0.650in)
Width: 127.00mm (5.000in)
Depth: 16.51mm (0.650in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr Anodes

CM3588745Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 116.84mm (4.600in)
Width: 40.64mm (1.600in)
Depth: 25.40mm (1.000in)
Categories: Sterndrive Anodes, Bar Anode, Bracket Anode...

CM821630KITA - Aluminium Anode - for use in salt and brackish water.
Fits Mercruiser Bravo I 1988 - present, Bravo II 1989 - present & Bravo III 1989 - 2003
This kit contains:
• CM821629 X 1
• Mounting Hardware
...

CM3841427Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 93.98mm (3.700in)
Width: 93.98mm (3.700in)
Depth: 38.10mm (1.500in)
Categories: Sterndrive Anodes, Block Anode, Wedge Anode,...

CM06411ZW1A - Aluminium Anode - for use in salt and brackish water.
Fits Honda 75-225 HP Outboards.
• Mounts on bottom of stern bracket.
• Manufacturers code 06411-ZW1-020
Dimensions:
Length: 223.52mm (8.800in)
Width:...