CMSGVT568A - Aluminium Anode - for use in salt and brackish water.

CMX80 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 100.08mm (3.940in)
Width: 130.05mm (5.120in)
Depth: 100.08mm (3.940in)
Categories: Propeller / Shaft Anodes, Propeller Anode,...

CMPNFZC07 - Zinc Anode - for salt water use. Not recommended for fresh water.
• Includes insert & hardware
• Prop nut complete
Dimensions:
Length: 88.90mm (3.500in)
Width: 69.85mm (2.750in)
Depth: 88.90mm (3.500in)...

CM6E84525102A - Aluminium Anode - for use in salt and brackish water.
ALUMINIUM YAMAHA Wing Plate Anode 6E8-45251-02
Fits the following Yamaha 9.9 and 15 HP outboard models:
1990 15ELD LOWER DRIVE 2
1990 15ESD LOWER...

CM41107ZW1B01ZA - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 73.66mm (2.900in)
Width: 111.76mm (4.400in)
Depth: 73.66mm (2.900in)
Categories: Outboard Anodes, Trim Tab Anode, Martyr Anodes,...

CM6G14525102A - Aluminium Anode - for use in salt and brackish water.
Yamaha anode 6G1-45251-02 for 6 to 8 HP UP TO 1989
Dimensions:
Length: 78.74mm (3.100in)
Width: 30.48mm (1.200in)
Depth: 6.10mm (0.240in)
Categories...

CM41109ZW1B00A - Aluminium Anode - for use in salt and brackish water.
Mounts on each side of the extension case, two (2) required per engine.
Fits Honda Outboard Models:
• 1999 BF115AX, 1999 BF130AX
• 2000 BF115AY, 2000...

CMSGSP625A - Aluminium Anode - for use in salt and brackish water.

CME3S - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an...

CM433580A - Aluminium Anode - for use in salt and brackish water.
• Johnson and Evinrude 50 HP - 225 HP outboards 1991 and newer.
• Transom Bracket V4, V6.
Dimensions:
Length: 175.26mm (6.900in)
Width: 35.56mm (1.400in)...