A practical, street legal upgrade that improves safety by increasing the light volume 100% without significantly reducing globe life.
Ideal for commercial and long haul drivers, this technology provides longer life, up to 4 times the life with...

TBLU-5.3MM-50 Nautic Pro vinyl-insulated ring terminal for crimping to 1.5–2.5 mm² (approx. 16–14 AWG) cable. The 5.3mm ring fits M5 studs and screws.

The barrel is tinned copper with a brazed seam for low-resistance current flow and...

720, Heavy Duty Battery Switch - 600A Continuous
Overview
The 720 Heavy-duty Battery Switch fits into the same contour lock system as used on the battery distribution system.
Rated at 600A continuous and 2500A cranking. It is well...

Labels–Circuit Breaker Panels
12V AUX HORN
AFT FRIDGE
ALTERNATOR
ANCHOR WINCH
BATHROOM FAN
BATHROOM OUTLETS
BRIDGE SUPPLY
DOCKING LIGHTS
ENGINE ROOM BILGE ALARM
FAX
FISH FINDER
HOLDING TANK...

• EyeBall, Replacement 12V-Black-I
Key Features:
• New Eyeball WILL fit into ''old-style'' Docking Light housing!
• Intended for Docking Only, Not for Continuous Use
Additional Details:
• Colour: Black...

• Standard Weather Resistant Contura III Rocker Switch
Key Features:
• Non-corrosive plastic construction
• Protects against dust and prolonged spray to IP66 and IP68 standards
• Meets UL 1500, ISO 8846 ignition...

HTRED-MBULL-50 Nautic Pro adhesive lined heat shrink male bullet connector for 0.5–1.5 mm² (approx. 22–16 AWG) cable. The 4mm round pin mates with a matching female bullet for a push-fit join that can be separated for service.

The barrel...

The internal adhesive of the heatshrink terminals bonds securely to both the terminal and cable. The combination of crimping, heatshrink and adhesive creates a level of strain relief not achievable with standard terminal types. The shrink/adhesive...

SPST, solder type terminals Amperage rating 6A at 12V, 3A at 24V Mounting opening 12.5mm dia.
SPST, solder type terminals
Amperage rating 6A at 12V, 3A at 24V
Mounting opening 12.5mm dia.