J-B Weld ultimate grey gasket maker & sealant is an RTV (Room Temperature Vulcanized) silicone gasketing material designed for use in mechanical assemblies where higher torque or closely spaced bolt profiles can lead to higher loads and cause...

PVC insulation tape gloss finish.
Black gloss finish
0.20mm in thickness
19mm width
20m length per roll

• Oetiker Clamp (Priced Per Pkg of 10)
Additional Details:
• Nominal OD Size: 3/8" or 9.5mm
Interchange:
Oetiker
• 16700004
Johnson/Evinrude Outboard
• 0346930

The Jaltest JT2006 Standard Digital Temperature Measurer (Cojali part number 50002006) is a compact, gun-style infrared thermometer for fast non-contact surface temperature checks. It is part of the Jaltest Tools range of measuring and testing...

The Jaltest JT2001 (Cojali part number 50002001) is a pocket-size digital multimeter from the Jaltest Tools range by Cojali, designed for everyday electrical fault-finding on marine engines and vessel systems, and equally at home on trucks, buses,...

The Jaltest JT2004 Digital Current Clamp (Cojali part number 50002004) is a compact true RMS clamp meter for electrical diagnostics on marine engines, commercial vehicles, agricultural machinery and construction equipment. The clamp jaw measures AC...

The Jaltest Testing Cable Set (Cojali part number 50003007) is a pair of red and black multimeter test leads for electrical measurements during vehicle diagnostics. Each lead has a right-angle 4 mm banana plug at one end and an insulated test probe...

The PROMT Parts Impeller Removal Tool PP-IMPTOOL11MM is the large-format puller for flexible impellers from 2.5" (65 mm) up to 4.5" (118 mm) in diameter. Also known as an impeller puller, it grips the impeller squarely and draws it straight off the...

The Jaltest Testing Cable Set (Cojali part number 50003008) is a pair of red and black safety test leads for electrical measurements on vehicle systems. Each lead has a right-angle shrouded safety banana plug at one end and a fine-point test probe...

Propeller Paint, Black Glossy

Use for touch-up of gearcases and other painted metal parts.
Matches the original colour of your Evinrude® or Johnson®
outboard or drive system.

• For best results, use primer, base coat...