CM8M0039340KITA - Aluminium Anode - for use in salt and brackish water.
Fits Mercruiser Zeus POD Drives
This kit contains:
• CM8M0039340 x 2
• Mounting hardware
Dimensions:
Length: 0.00mm (0.000in)
Width: 0....

CM15539500Z - Zinc Anode - for salt water use. Not recommended for fresh water.
For Gori 3-blade 18" and 20" saildrive propellers.
Dimensions:
Length: 33.02mm (1.300in)
Width: 93.98mm (3.700in)
Depth: 33.02mm (1.300in)
...

CMY200250KITA - Aluminium Anode - for use in salt and brackish water.
Fits Yamaha 200-250 HP Outboards
This kit contains:
• CM6G54525101 Yamaha Outboard Handle Bar Anode (6G5-45251-02)
• CM61A4537100 Yamaha Outboard Trim...

CMPNRAD60 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 98.04mm (3.860in)
Width: 82.04mm (3.230in)
Depth: 98.04mm (3.860in)
Categories: Propeller / Shaft Anodes, Propeller Anode,...

CMSGSP626A - Aluminium Anode - for use in salt and brackish water.

For thrusters with 215mm, 250mm, or 300mm tunnel diameter.
Fits models SP125, SP155, SP240, SP285, SE120, SEP120, SE130, SEP130, SE150, SEP150, SE170, SEP170, SE210,...

CMZHC2AA - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 146.05mm (5.750in)
Width: 67.31mm (2.650in)
Depth: 31.75mm (1.250in)
Categories: Hull Anodes, Streamlined Anode, Martyr Anodes

CMALPHAKITZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Fits 1991 and newer Mercruiser Alpha One Gen II drives
This kit contains:
• CM762145 Mercury/Mercruiser Flat Trim Tab Aluminum Anode
•...

CM806105Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Alpha I Generation II Engine
Dimensions:
Length: 83.82mm (3.300in)
Width: 83.82mm (3.300in)
Depth: 22.86mm (0.900in)
Categories: Sterndrive...

CMR02M - Magnesium Anode - for fresh water only. Not recommended for salt or brackish water.
Dimensions:
Length: 12.70mm (0.500in)
Width: 71.37mm (2.810in)
Depth: 12.70mm (0.500in)
Categories: Rudder / Trim Tab Anodes,...

CMMP70RA - Aluminium Anode - for use in salt and brackish water.
Designed for 1-1/4" to 1-3/8" (30 mm to 35 mm) shafts
Screw holes are 2" center to center
Height: 1-3/4"
Outside Diameter: 2-5/8"
Fastener: 5 mm x 0.8 mm x 20...