CMSGVT447A - Aluminium Anode - for use in salt and brackish water.

Aluminum anode for bow thruster models BOW 220 / 230 / 285 / 310. (All thrusters have a 300mm diameter tunnel.)

CMPNFZC07 - Zinc Anode - for salt water use. Not recommended for fresh water.
• Includes insert & hardware
• Prop nut complete
Dimensions:
Length: 88.90mm (3.500in)
Width: 69.85mm (2.750in)
Depth: 88.90mm (3.500in)...

CMSGVT459A - Aluminium Anode - for use in salt and brackish water.

Anode for older bow thruster models BOW 23A, 50, 80, and many stern thrusters. (Note: Model 23 does not have an anode.)

CM6E84525102A - Aluminium Anode - for use in salt and brackish water.
ALUMINIUM YAMAHA Wing Plate Anode 6E8-45251-02
Fits the following Yamaha 9.9 and 15 HP outboard models:
1990 15ELD LOWER DRIVE 2
1990 15ESD LOWER...

CME3S - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an...

CM41109ZW1003A - Aluminium Anode - for use in salt and brackish water.
Fits only Honda 1997 and 1998 outboard models BF75A and BF90A.
• All other years of BF75A and BF90A (and all years of BF75D and BF90D) use CM41109ZW1B00.
• Mounts...

CMSGVT25SSZ - Zinc Anode - for salt water use. Not recommended for fresh water.

CMPNME - Magnesium Anode - for fresh water only. Not recommended for salt or brackish water.
Dimensions:
Length: 79.50mm (3.130in)
Width: 63.50mm (2.500in)
Depth: 79.50mm (3.130in)
Categories: Propeller / Shaft Anodes,...

CM433580A - Aluminium Anode - for use in salt and brackish water.
• Johnson and Evinrude 50 HP - 225 HP outboards 1991 and newer.
• Transom Bracket V4, V6.
Dimensions:
Length: 175.26mm (6.900in)
Width: 35.56mm (1.400in)...

CMSGVT516A - Aluminium Anode - for use in salt and brackish water.