CMAN255 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 83.82mm (3.300in)
Width: 71.12mm (2.800in)
Depth: 83.82mm (3.300in)
Categories: Propeller / Shaft Anodes, Propeller Anode,...

CM395780A - Aluminium Anode - for use in salt and brackish water.
60 €“ 280 HP
Dimensions:
Length: 50.80mm (2.000in)
Width: 40.64mm (1.600in)
Depth: 33.02mm (1.300in)
Categories: Outboard Anodes, Block Anode, Wedge...

CMBNT1AKITZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Fits Bennet Trim Tabs.
This kit contains:
• CMBNT1A X 2
• Mounting hardware
Dimensions:
Length: 96.01mm (3.780in)
Width: 27....

115258 Zinc Anode for Volvo Penta
Replaces Volvo Penta: 838929 (804107, 800476, 858501)
Also as aluminium anode (No 115293) and magnesium anode (No 115275).

Anode for shield
Earlier version

Suitable for Volvo...

CM41100276Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Fits BP800, BP900, BP1200 and SP1300 thrusters.
Dimensions:
Length: 50.80mm (2.000in)
Width: 25.40mm (1.000in)
Depth: 15.75mm (0.620in)
...

WE50-Salt - Silver/Silver Chloride Reference Electrode for measuring Anodes and Cathodic Protection.

Measuring the vessel's potential voltage underwater is critical to determining if the vessel's anodes are functioning correctly and...

CM865182CA - Aluminium Anode - for use in salt and brackish water.
Bravo III Engine 2004 - present
Dimensions:
Length: 88.90mm (3.500in)
Width: 53.34mm (2.100in)
Depth: 88.90mm (3.500in)
Categories: Sterndrive Anodes,...

CM6G14525103A - Aluminium Anode - for use in salt and brackish water.
6-8HP Plate Anode 6G1-45251-03 fits the following Yamaha outboard models:
1990 6LD LOWER DRIVE 1
1990 6SD LOWER DRIVE 1
1990 8LD LOWER DRIVE 1
1990 8SD...

CM42121A - Aluminium Anode - for use in salt and brackish water.
For 6, 8, 10 and 15 HP Mercury outboards
Dimensions:
Length: 42.16mm (1.660in)
Width: 27.94mm (1.100in)
Depth: 10.67mm (0.420in)
Categories: Outboard...

CMT20A - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 86.36mm (3.400in)
Width: 45.72mm (1.800in)
Depth: 15.24mm (0.600in)
Categories: Hull Anodes, Teardrop Anode, Martyr Anodes