CMR01 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 8.89mm (0.350in)
Width: 47.75mm (1.880in)
Depth: 8.89mm (0.350in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr...

CM804079002A - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 55.88mm (2.200in)
Width: 22.86mm (0.900in)
Depth: 33.02mm (1.300in)
Categories: Outboard Anodes, Engine Cooling System Anode, Martyr...

CM6G81132500A - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 15.24mm (0.600in)
Width: 12.70mm (0.500in)
Depth: 15.24mm (0.600in)
Categories: Outboard Anodes, Ring Anode, Round Anode, Martyr...

CM290DPKITA - Aluminium Anode - for use in salt and brackish water.
Complete aluminum anode kit for Volvo Penta 290DP style drives, including DP-C1, DP-D1, DP-S, DP-E, and DP-G.
This kit contains:
• 875821A Volvo Penta DP...

CMBRAVO23KITA - Aluminium Anode - for use in salt and brackish water.
Fits 1988 and newer Bravo II drives, and 1995-2003 Bravo III drives.
This kit contains:
• CM762145 Mercury/Mercruiser Flat Trim Tab Anode
• CM821630C2...

CMY4050KITA - Aluminium Anode - for use in salt and brackish water.
Fits Yamaha 40 - 50HP Outboards
This kit contains:
• CM6644537101 Yamaha Outboard Trim Tab Anode (664-45371-01)
• CM65W4525100 Yamaha Outboard Small Bar...

CMPNZD - Zinc Anode - for salt water use. Not recommended for fresh water.
• Fasteners are included with all replacement prop nuts.
• Nylon patch is good for one initial application only.
• Please use lock tite or teflon tape to...

CMX01 - Zinc Anode - for salt water use. Not recommended for fresh water.
• Interlocking halves
• Full shaft contact (100% circular radius)
• Extra alloy around the fastener
• Easy installation underwater
• Bolt retaining...

CMPNZH - Zinc Anode - for salt water use. Not recommended for fresh water.
• Fasteners are included with all replacement prop nuts.
• Nylon patch is good for one initial application only.
• Please use lock tite or teflon tape to...

CMC07 - Zinc Anode - for salt water use. Not recommended for fresh water.
Easy installation underwater: Bolt retaining washers prevent the anode from falling off.
• Full shaft contact: 100% circular radius
• Interlocking halves...