J-B Weld ultimate copper silicone gasket maker and sealant is an RTV (Room Temperature Vulcanized) silicone gasketing material that is 3 times more oil resistant than conventional silicones and designed to resist the high operating temperatures of turbocharged or high-performance engines. Ultimate Copper is effective in temperatures from -75F to 700F intermittent. Upon curing, the silicone forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering, is sensor safe and is great for many automotive applications.
Advanced high temperature RTV sealant adhesive.
Designed for high operating temperatures.
Three times more oil resistant.


Read more...

J-B Weld ultimate grey gasket maker & sealant is an RTV (Room Temperature Vulcanized) silicone gasketing material designed for use in mechanical assemblies where higher torque or closely spaced bolt profiles can lead to higher loads and cause gasket and sealing failures for average silicones. Upon curing, the silicone forms a tough, waterproof, gasket and seal on most surfaces. It will not shrink or crack, resists oil and petroleum products, resists weathering, is sensor safe, has good temperature resistance up to 260C intermittent and is great for many automotive applications.
Ultimate grey RTV gasket maker and sealant.
Designed for use in mechanical assemblies.
Use in higher torque and higher load applications.
Temperature resistance up to 260C.
Set time: 1 hour, Cure colour: Grey.
Read more...

Fix190HT is a premium, high initial tack bonding adhesive sealant based on MS-Polymer®. Chemically neutral and fully elastic, it's ideal for low movement joints, structural bonding, and direct glazing in marine, transport, aerospace, and construction industries. Suitable for below waterline applications.

Fix190HT meets the following standards:
- DNVGL Structural bonding and direct glazing
- AS/NZ4020 Potable water sealing
- 2020 IMO FTP Test Part 2 Smoke & Toxicity Test
- 2020 IMO FTP Test Part 5 Surface Flammability
- EN 45545-2 R1+R7 Hazard Level 1, 2 & 3

Key Characteristics:
- Black Colour
- 600ml Foil Bag
- Outstanding bond strength on most substrates, color stable and UV resistant
- Excellent adhesion on porous and non-porous substrates (primer may be required)
- High-performance mechanical properties
- Flexible elastic rubber with ±20% movement accommodation
- Easy application with no bubble formulation
- Ecological advantages: free from isocyanates, solvents, halogens, and acids
- Verified by the Australian Government as non-hazardous
- Paintable after 1 hour (compatibility tests recommended)

Suitable For:
- UV Resistant, Non-Yellowing White
- Marine Deck Fittings
- Composite Structural Bonding
- Composite Finishing & Sealing
- Direct Glazing Bonding & Sealing
- Framed Glass Bonding & Sealing
- Bonding Underwater Fully Submerged
- Above Waterline Bonding & Sealing
- Below Waterline Screw-In Fittings & Fixtures Bonding & Sealing
- Stainless Steel & Aluminum Bonding
- Steel Bonding
- Wood Bonding (hardwood, softwood, plywood)
- Fiberglass Including Carbon Fiber
- Stone, Marble, Glass & Ceramic Tile BondingRead more...

J-B Weld water pump & thermostat housing gasket maker & sealant is a specially designed RTV (Room Temperature Vulcanized) silicone gasketing material for use in mechanical assemblies. Curing occurs with exposure to moisture in the air, forming a tough, waterproof, petroleum and weather resistant gasket and seal on most surfaces. This product is grey in colour, will not shrink or crack, is sensor safe, has good temperature resistance up to 260C intermittent and is great for many automotive applications.
Water pump and thermostat gasket maker/sealant.
Maximum oil resistance.
Forms a tough, waterproof seal on most surfaces.
Temperature resistance up to 260C.
Set time: 1 hour, Cure colour: Black.
Read more...

Fix190HT is a premium, high initial tack bonding adhesive sealant based on MS-Polymer®. Chemically neutral and fully elastic, it's ideal for low movement joints, structural bonding, and direct glazing in marine, transport, aerospace, and construction industries. Suitable for below waterline applications.

Fix190HT meets the following standards:
- DNVGL Structural bonding and direct glazing
- AS/NZ4020 Potable water sealing
- 2020 IMO FTP Test Part 2 Smoke & Toxicity Test
- 2020 IMO FTP Test Part 5 Surface Flammability
- EN 45545-2 R1+R7 Hazard Level 1, 2 & 3

Key Characteristics:
- White Colour
- 600ml Foil Bag
- Outstanding bond strength on most substrates, color stable and UV resistant
- Excellent adhesion on porous and non-porous substrates (primer may be required)
- High-performance mechanical properties
- Flexible elastic rubber with ±20% movement accommodation
- Easy application with no bubble formulation
- Ecological advantages: free from isocyanates, solvents, halogens, and acids
- Verified by the Australian Government as non-hazardous
- Paintable after 1 hour (compatibility tests recommended)

Suitable For:
- UV Resistant, Non-Yellowing White
- Marine Deck Fittings
- Composite Structural Bonding
- Composite Finishing & Sealing
- Direct Glazing Bonding & Sealing
- Framed Glass Bonding & Sealing
- Bonding Underwater Fully Submerged
- Above Waterline Bonding & Sealing
- Below Waterline Screw-In Fittings & Fixtures Bonding & Sealing
- Stainless Steel & Aluminum Bonding
- Steel Bonding
- Wood Bonding (hardwood, softwood, plywood)
- Fiberglass Including Carbon Fiber
- Stone, Marble, Glass & Ceramic Tile BondingRead more...

J-B Weld ultimate black gasket maker & sealant is an RTV (Room Temperature Vulcanized) silicone gasketing material designed for use in mechanical assemblies where maximum petroleum and oil resistance is required. Upon curing, the silicone forms a tough, waterproof, gasket and seal on most surfaces. It will not shrink or crack, resists oil and petroleum products, resists weathering, is sensor safe, has good temperature resistance up to 260C intermittent and is great for many automotive applications.
Ultimate black RTV gasket maker and sealant.
Designed for use in mechanical assemblies.
Maximum petrol and oil resistance.
Temperature resistance up to 260C.
Set time: 1 hour, Cure colour: Black.
Read more...

J-B Weld ultimate copper silicone gasket maker and sealant is an RTV (Room Temperature Vulcanized) silicone gasketing material that is 3 times more oil resistant than conventional silicones and designed to resist the high operating temperatures of turbocharged or high-performance engines. Ultimate Copper is effective in temperatures from -75F to 700F intermittent. Upon curing, which occurs when the product is exposed to the moisture in air, the silicone forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering, is sensor safe and is great for many automotive applications.
Advanced high temperature RTV sealant adhesive.
Designed for high operating temperatures.
Three times more oil resistant.


Read more...

SuperWeld is a specially formulated cyanoacrylate super glue that provides a strong, instant bond in just seconds. It works on multiple and hard to bond surfaces. The brush applicator allows for even and pin point surface application. Great for auto accessories, rubber, plastic, vinyl, leather, cloth and rear view mirror repair. Use on automotive, brick, concrete, epoxy and adhesives, fiberglass, metal and more.
A specially formulated cyanoacrylate super glue.
Provides a strong, instant bond in just seconds.
It works on multiple and hard to bond surfaces.
The inner nozzle allows for pin point accuracy.
Pack contains two 2G tubes.
Read more...

A specially formulated cyanoacrylate super glue that provides a strong, instant bond in just seconds. It works on multiple and hard to bond surfaces. The brush applicator allows for even and pin point surface application. Great for auto accessories, rubber, plastic, vinyl, leather, cloth and rear view mirror repair. Use on automotive, ceramic, cloth and carpet, epoxy and adhesives, glass, rubber, specialty products and more.
Specially formulated cyanoacrylate super glue.
Instant bond in just seconds.



Read more...