CMX10AL - Aluminium Anode - for use in salt and brackish water.
The world’s best shaft anode design:
• Fit & longevity
• Easy installation underwater
• Bolt retaining washers prevent the anode from falling off
Dimensions...

CM348602170A - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 50.80mm (2.000in)
Width: 50.80mm (2.000in)
Depth: 50.80mm (2.000in)
Categories: Outboard Anodes, Trim Tab Anode, Martyr Anodes, Tohatsu...

CM358407Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Fits Volvo Penta SD 130/150 2002 2003 series

From Volvo 3888305 22651247 23615636 23974203

Dimensions:
Length: 39.88mm (1.570in)
Width...

CMMZC406A - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 228.60mm (9.000in)
Width: 127.00mm (5.000in)
Depth: 25.40mm (1.000in)
Categories: Hull Anodes, Streamlined Anode, Martyr Anodes

CM818298M - Magnesium Anode - for fresh water only. Not recommended for salt or brackish water. 
Fits:
Mercury/Mariner 30/40 FourStroke
40 (4 cylinder)
50 (3 cylinder 1987-1997)
55 (3 cylinder)
60-90 (3 cylinder 1987...

CM367Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Transom mounted aluminum anode for boats with OMC outdrives and Johnson/Evinrude outboards that require additional protection.
Dimensions:
Length: 195.58mm (7....

CM3852970A - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 101.60mm (4.000in)
Width: 27.94mm (1.100in)
Depth: 101.60mm (4.000in)
Categories: Sterndrive Anodes, Bar Anode, Bracket Anode, Martyr...

CM06411ZW1M - Magnesium Anode - for fresh water only. Not recommended for salt or brackish water. 
Fits Honda 75-225 HP Outboards.
• Mounts on bottom of stern bracket.
• Manufacturers code 06411-ZW1-020
Dimensions:
Length:...

CM6644537101M - Magnesium Anode - for fresh water only. Not recommended for salt or brackish water. 
CM 41107-ZV5-000* (Same as 664-45371-01 )
Dimensions:
Length: 55.88mm (2.200in)
Width: 96.52mm (3.800in)
Depth: 55.88mm (2....

CM826134KITA - Aluminium Anode - for use in salt and brackish water.
Fits Mercury/Mariner 35-300hp outboards & Force 90 & 120hp 1995 and newer outboards. Located in the two side pockets on the gearhousing just above the cavitation plate...