The internal adhesive of the heatshrink terminals bonds securely to both the terminal and cable. The combination of crimping, heatshrink and adhesive creates a level of strain relief not achievable with standard terminal types. The shrink/adhesive...

SPST, silver contacts, push on terminals. Amperage rating 20A at 12V, 10A at 24V. Mounting opening 12.5mm dia.
SPST, silver contacts, push on terminals.
Amperage rating 20A at 12V, 10A at 24V.
Mounting opening 12.5mm dia.
...

• Junction Block
Key Features:
• Combines negative and positive buses in one block
• Brass terminal bar
• 150 Amp
• Twelve 8-32 Screw Terminals
Additional Details:
• Height: 0.44"
•...

BI-1202-3A Battery Isolator
Rated for use with 10 to 350 amp alternators on 12, 24, or 32 volt negative ground systems.
NOTE: Battery Isolators cannot be used on 12 volt charging systems 2ith 24 volt trolling motors or newer outboard...

DPDT, push on terminals. Amperage rating 25A at 12V, 12.5A at 24V. Mounting opening 12mm dia.
DPDT, push on terminals.
Amperage rating 25A at 12V, 12.5A at 24V.
Mounting opening 12mm dia.

The internal adhesive of the heatshrink terminals bonds securely to both the terminal and cable. The combination of crimping, heatshrink and adhesive creates a level of strain relief not achievable with standard terminal types. The shrink/adhesive...

SPST, pre-wired with 200mm leads. Amperage rating 20A at 12V, 10A at 24V. Mounting opening 12mm dia.
SPST, pre-wired with 200mm leads.
Amperage rating 20A at 12V, 10A at 24V.
Mounting opening 12mm dia.

Solder Splice Terminators combine all the advantages of heatshrink, low-melt solder and waterproofing protection glands � creating a fast, waterproof, electrically reliable and fully insulated connection without the use of a soldering iron,...

HTYEL-MBLAD-50 Nautic Pro adhesive lined heat shrink male blade terminal (also called a spade or quick-disconnect) for 3.0–6.0 mm² (approx. 12–10 AWG) cable. Plugs into a 6.3mm (1/4") female spade receptacle for a push-on join that can be separated...