• Shieldsflex II Marine Water/Exhaust Hose (with wire) 3-1/2" x 10 FT
Key Features:
• Shieldsflex II Marine Water/Exhaust Hose has a black synthetic rubber tube and cover
• Reinforced with wire helix embedded between plies of...

• Exhaust Hose T Bolt Band Clamp
Key Features:
• Designed to fit Shields series 200, 250, and any application below the water line
• The band is 316 stainless steel and is .025 thick by .75 wide
• Includes an extra...

• Voltmeter, Lido Pro, Fog Resistant 2" 8-18 VDC
Key Features:
• White dial, black numerals, black pointer with fire-orange tip
• Scratch resistant curved glass lenses, with polished stainless steel, near-flush bezels...

• GPS Speedometer, Black Premier Pro 60 MPH
Key Features:
• Included LCD heading display to show course over ground
• Use our GPS antenna (sold sep) or connect to an existing NMEA 0183 GPS device - connectors included...

• Shields Livewell Hose 1-1/8" x 50 FT
Key Features:
• Shields Livewell Hose has a black smooth cover with vinyl helix
• It is rated for full vacuum and is resistant to mild chemicals and saltwater
• This hose is...

WM83212, Stainless Panel Stud .62" Qty of 15
(Qty of 10) 304 Stainless Steel Studs Press Fit #8 x 32 Threads
Stainless Panel Stud .62" Base #8 x 32 Threads 0.75" Tall

• Shieldsflex II Marine Water/Exhaust Hose (with wire) 3-1/2" x 12-1/2'
Key Features:
• Shieldsflex II Marine Water/Exhaust Hose has a black synthetic rubber tube and cover
• Reinforced with wire helix embedded between plies...

Black dial, red graduations, white numerals, vivid white pointer staff. Scratch resistant curved glass lens with black near-flush bezels. Perimeter and thru-dial lighting.
Size:
2"
Dial Range:
UP-DOWN
Trim Gauges (Outboard,...

• GPS Speedometer, Black Premier Pro 80 mph
Key Features:
• Full automotive type lighting, no ''halo'' around dial edges.
• When lit, white dial grads become red, pointer lights white
• Black dial, white graduations/...

Bob’s Machine Shop Transom Backing Plates – 110-200500 (Double Top Hole)
Enhance your boat’s transom strength with Bob’s Machine Shop transom backing plates. Designed to distribute the load of engine mounting bolts, these machined cold-rolled...