CMEZ4 - Zinc Anode - Replacement pencil anodes thread into your existing pencil anode brass plug(s).
Dimensions:
Length: 98.55mm (3.880in)
Width: 12.70mm (0.500in)
Depth: 0.00mm (0.000in)

CM31640A - Aluminium Anode - for use in salt and brackish water.
Fits most Mercury/Mariner outboards 35 hp and above & Mercruiser Alpha One sterndrives.
Dimensions:
Length: 83.82mm (3.300in)
Width: 91.44mm (3.600in)
...

CME00 - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an...

CMPNZB - Zinc Anode - for salt water use. Not recommended for fresh water.
• Fasteners are included with all replacement prop nuts.
• Nylon patch is good for one initial application only.
• Please use lock tite or teflon tape to...

CMAN230 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 53.59mm (2.110in)
Width: 41.91mm (1.650in)
Depth: 53.59mm (2.110in)
Categories: Propeller / Shaft Anodes, Propeller Anode,...

CM6884537102Z - Zinc Anode - for salt water use. Not recommended for fresh water.
688-45371-02 Yamaha Outboard Trim Tab Anode Fits the following Yamaha outboard models:
T50LA, T50LB, T50TLR, T60LA, T60LB, T60TLR, F70LA, F75LA, F75TLR,...

CM6E54537101Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Fits the following Yamaha outboard models:
F115 & VF115 - all models
115 HP 2-Stroke - all models
130 HP 2-Stroke - all models
150ETL...

CMX10 - Zinc Anode - for salt water use. Not recommended for fresh water.
The world’s best shaft anode design:
• Fit & longevity
• Easy installation underwater
• Bolt retaining washers prevent the anode from falling off
...

CM67F1132500A - Aluminium Anode - for use in salt and brackish water.
80-100 HP
Dimensions:
Length: 0.00mm (0.000in)
Width: 0.00mm (0.000in)
Depth: 0.00mm (0.000in)
Categories: Outboard Anodes, Engine Cooling System...

CM392123Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Fits 1982 - 1990 Johnson/Evinrude outboards of 90 to 235 HP.
Dimensions:
Length: 119.38mm (4.700in)
Width: 76.20mm (3.000in)
Depth: 22.86mm (0....