Browse our extensive range of High Quality Marine Electrical Components at Promt Parts

CONTACT

$0.00

CART

NEW ZEALAND'S LARGEST MARINE PARTS STORE

ORDERS DISPATCHED TOMORROW: (Excludes weekends & public holidays)

701B

BAT SW 275A CONT BULK MC24

B = NO PACKAGING
Contour Battery Master Switch
• Patented Contour Locking System allows
switch to be a stand alone unit, or locked
together with other switches
• Control knob can be removed by switching
to counter-clockwise 45° position
• Interchangeable labeling system allowing a
full range of applications (Part # 713 or 715)
• Three removable side plates for access of up to
1/0 cables plus a rear cover insulating the rear
terminals against any short circuits. This
ensures the switch meets ABYC requirements
• 2.1" (52 mm) hole for mounting
• Available with house knob (OEM # 701B-HB)
or with chassis knob (OEM # 701B-CH)
Specifications - All recessed or surface mount, tin-plated copper studs &
nuts, ignition-protectedRead more...

$49.61 (excl GST)

Stock Qty: 5+

9-15100

SWITCH BATTERY 24059

CC-810

CC S/ ENG 3 x BATTERY SW COMBO MC3

CC-810, CC S/ ENG 3 x BATTERY SW COMBO MC3
Contour Connect 3 Batt Switch Panel with 3 Disconnects
Overview
The CC-810 Contour Connect 3 Batt Switch Panel with 3 Disconnects is supplied with standard 3 x 701-PM battery switches pre-assembled.
This device is ideal for installing alongside any other Contour Connect Modules.Read more...

$407.16 (excl GST)

Stock Qty: 5+

770-EZ-B

BEP MARINE PRO INSTALLER EASY MOUNT BATTERY SWITCH 400A CONT RATING NO PACKAGING

770-EZ-B, Pro Installer 400A EZ-Mount On/Off Battery Switch - MC10
Overview
As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front.
Never has installation been so easy and cabling so accessible. With their shared interconnection height,
EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations.
Optimized cable access makes installation a breeze. Pro Installer switches set the new benchmark with outstanding ergonomics,
intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment.
The outstanding performance and features of this powerful new generation battery switch appeal to both the installer and end user.
All ratings, footprints and features of the EZ-Mount switch match the high quality of our standard switches.Read more...

$124.05 (excl GST)

Stock Qty: 5+

770-DP-EZ

BEP MARINE PRO INSTALLER EASY MOUNT DOUBLE POLE BATTERY SWITCH 400A CONT RATING

770-DP-EZ, Pro Installer 400A EZ-Mount Double Pole Battery Switch - MC10
Overview
An addition to our multi award winning Pro Installer EZ Mount range, this battery switch provides Double Pole On/Off
functionality so that both positive and negative battery terminals can be isolated. Most commonly used on metal hulled craft,
full isolation ensures there is no risk of stray currents that may cause galvanic corrosion,
and also guarantees optimum safety during servicing or mishap, for example with mining equipment.
As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front for the easiest surface mounting.
With their shared interconnection height, EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range,
resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze.Read more...

$176.27 (excl GST)

Stock Qty: 5+

771-S-EZ-B

BEP MARINE PRO INSTALLER EASY MOUNT BATTERY COMBINING SELECTOR SWITCH 400A CONT RATING NO PACKGING

771-S-EZ-B, Pro Installer 400A EZ-Mount Battery Selector Switch (1-2-Both-Off) - Bulk MC12
Overview
As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front.
Never has installation been so easy and cabling so accessible.
With their shared interconnection height, EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range, resulting in the fastest,
most compact installations. Optimized cable access makes installation a breeze.
Pro Installer switches set the new benchmark with outstanding ergonomics,
intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment.
The outstanding performance and features of this powerful new generation battery switch appeal to both the installer and end user.
All ratings, footprints and features of the EZ-Mount switch match the high quality of our standard switches.Read more...

$177.32 (excl GST)

Stock Qty: 5+

716-SQ-140A-DVSR

CLSTR SINGLE ENG 3x701-DVSR SQ MC8

Single Engine, Two Battery Banks
SQUARE
An ideal replacement for a Battery Selector Switch. Just remove selector
switch and connect existing wires to a 716 cluster, no extra wires are
required for a fully automatic battery management system.
No more flat start batteries.
Electronics protection from harmful engine start spikes.
The 716 cluster is for use on charging systems up to 150A.
To be used in the following systems:
1. Single outboard dual battery bank.
2. Single alternator inboard engine dual battery bank.
The 716 cluster replaces battery isolator systems.
For VSR operation.Read more...

$443.99 (excl GST)

Stock Qty: 5+

700

BEP MARINE EASYFIT BATTERY SWITCH 275A CONT RATING

700, BAT SW EASYFIT 275A CONT MC10
Easyfit Battery SwitchCreated primarily for installations where switches need to be recessed through varying thicknesses of panels.
• Easily removable threaded ring allows for panel thicknesses up to 3/4" (19 mm)
• Same features as the 701 with the removable knob 45° past the off position
• Includes removable back cover ensuring that it meets ABYC requirements
• Surface mount option offers a unique style compared to other switches available on the market
• Can easily be retro-fitted in place of most European post and lever type switches
Specifications -
All recessed or surface mount, tin-plated copper studs & nuts, ignition-protectedRead more...

$74.85 (excl GST)

Stock Qty: 5+

701

BEP 701 Battery switch

701, BEP 701 Battery switch
Contour Battery Master Switch
• Patented Contour Locking System allows switch to be a stand alone unit, or locked together with other switches
• Control knob can be removed by switching to counter-clockwise 45° position
• Interchangeable labeling system allowing a full range of applications (Part # 713 or 715)
• Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear
terminals against any short circuits. This ensures the switch meets ABYC requirements
• 2.1" (52 mm) hole for mounting
• Available with house knob (OEM # 701B-HB) or with chassis knob (OEM # 701B-CH)
Specifications -
All recessed or surface mount, tin-plated copper studs & nuts, ignition-protectedRead more...

$54.4 (excl GST)

Stock Qty: 5+

714-140A-DVSR-B

BEP MARINE DUAL BATTERY SINGLE ENGINE SWITCH CLUSTER WITH VOLTAGE SENSITIVE RELAY NO PACKAGING

714-140A-DVSR, Battery Distribution Cluster for Single Engine with Two Battery Banks
B = NO PACKAGING
Overview
The 714-140A-DVSR-B uses a dual sensing DVSR (710-140A).
This system ensures that you will always have a fully charged reserve battery.
When the switch is in position one, battery one becomes the sensing battery for the VSR.
Battery two, which is in isolation, is charged through the VSR when the engine is running to ensure that it is always fully charged.
When the switch is in position two, battery two becomes the sensing battery and battery one is charged through the VSR.
The fact that there is always a fully charged battery in reserve is a huge safety benefit.
Number of Battery Banks: TwoRead more...

$272.94 (excl GST)

Stock Qty: 5

Anodes

Boating Accessories

Cooling Systems

Drive Parts

Drive Parts

Electrical

Engine Electrical

Engine Parts

Fuel Systems

Ignition Systems

Oil/Lube & Engine Care

Propellers

Rigging

Steering & Controls

Tools/Shop Supplies

Shop by Brand

You are here

701B

BAT SW 275A CONT BULK MC24

9-15100

SWITCH BATTERY 24059

CC-810

CC S/ ENG 3 x BATTERY SW COMBO MC3

770-EZ-B

BEP MARINE PRO INSTALLER EASY MOUNT BATTERY SWITCH 400A CONT RATING NO PACKAGING

770-DP-EZ

BEP MARINE PRO INSTALLER EASY MOUNT DOUBLE POLE BATTERY SWITCH 400A CONT RATING

771-S-EZ-B

BEP MARINE PRO INSTALLER EASY MOUNT BATTERY COMBINING SELECTOR SWITCH 400A CONT RATING NO PACKGING

716-SQ-140A-DVSR

CLSTR SINGLE ENG 3x701-DVSR SQ MC8

700

BEP MARINE EASYFIT BATTERY SWITCH 275A CONT RATING

701

BEP 701 Battery switch

714-140A-DVSR-B

BEP MARINE DUAL BATTERY SINGLE ENGINE SWITCH CLUSTER WITH VOLTAGE SENSITIVE RELAY NO PACKAGING

Subscribe to our newsletter

Company

Engine Diagrams

Technical Information

Product Information

Connect with Us