CMF90Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 16.76mm (0.660in)
Width: 88.90mm (3.500in)
Depth: 16.76mm (0.660in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr...

CM61A4537100A - Aluminium Anode - for use in salt and brackish water.
CMY 61A-45371-00 Fits the following Yamaha outboard models:
F225 4-Stroke - All Models
F250 4-Stroke - All Models
F300 4-Stroke 4.2L V6 - All Models
...

CM65W4525100A - Aluminium Anode - for use in salt and brackish water.
Bracket Small Bar anode fits Yamaha Marine 8, 9.9, 15, 20, 25, 30, 40, 50, 60, 70, 150, and 200 HP 2001 - 2006 model outboard engines.
Dimensions:
Length: 64.77mm (...

CMSZ4050KITA - Aluminium Anode - for use in salt and brackish water.
Fits Suzuki 40-50HP Outboards
This kit contains:
• CM5532095310 X 2
• CM5532187J00 X 4
• CM5512595500 X 1
Dimensions:
Length: 203.20mm (8....

CMZHC2AZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 146.05mm (5.750in)
Width: 67.31mm (2.650in)
Depth: 31.75mm (1.250in)
Categories: Hull Anodes, Streamlined Anode, Martyr Anodes

CMX06 - Zinc Anode - for salt water use. Not recommended for fresh water.
• Interlocking halves
• Full shaft contact (100% circular radius)
• Extra alloy around the fastener
• Easy installation underwater
• Bolt retaining...

CME2BSP - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an...

CM6G54525101Z - Zinc Anode - for salt water use. Not recommended for fresh water.
6G5-45251-01 Handlebar Anode Fits the following Yamaha outboard models:
F115 & LF115 4-Stroke - All Models (except JB, LB, XB)
F150 & LF150 4-...

CMDIVERMINI - Zinc Anode - for salt water use. Not recommended for fresh water.
Diver's Dream hull anodes with slotted holes eliminate the need for drilling and make it easy for divers to install them in the water. We offer these anodes in zinc...

CMR01AL - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 8.89mm (0.350in)
Width: 47.75mm (1.880in)
Depth: 8.89mm (0.350in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr Anodes