CMBRAVO3KITA - Aluminium Anode - for use in salt and brackish water.
Fits Mercruiser Bravo III mid-2003 and newer Drives
This kit contains:
• CM762144 Mercruiser Flat Trim Tab Anode (no threads)
• CM762145 Mercury/...

CME2BSP - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an...

CMR01AL - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 8.89mm (0.350in)
Width: 47.75mm (1.880in)
Depth: 8.89mm (0.350in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr Anodes

CMX15 - Zinc Anode - for salt water use. Not recommended for fresh water.
The world’s best shaft anode design:
• Fit & longevity
• Easy installation underwater
• Bolt retaining washers prevent the anode from falling off
...

CM3C86021700A - Aluminium Anode - for use in salt and brackish water.
Fits Tohatsu Mega 25-50HP Outboards
Dimensions:
Length: 50.80mm (2.000in)
Width: 58.42mm (2.300in)
Depth: 50.80mm (2.000in)
Categories: Outboard...

CMEZ00 - Zinc Anode - Replacement pencil anodes thread into your existing pencil anode brass plug(s).
Dimensions:
Length: 59.94mm (2.360in)
Width: 6.35mm (0.250in)
Depth: 0.00mm (0.000in)

CMR02AL - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 12.70mm (0.500in)
Width: 71.37mm (2.810in)
Depth: 12.70mm (0.500in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr Anodes

CMR03M - Magnesium Anode - for fresh water only. Not recommended for salt or brackish water.
Dimensions:
Length: 12.70mm (0.500in)
Width: 95.25mm (3.750in)
Depth: 12.70mm (0.500in)
Categories: Rudder / Trim Tab Anodes,...

CMF70Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 12.70mm (0.500in)
Width: 69.85mm (2.750in)
Depth: 12.70mm (0.500in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr...