Propspeed is specially formulated to prevent marine growth from bonding to metal surfaces below the waterline. It is proven to increase boat efficiency, reduce drag and save fuel and maintenance costs. It features an exceptionally strong chemical and mechanical bond between the metal substrate, the Etching Primer and the Clear Coat– ensuring that the Propspeed coating actually sticks to your running gear and performs season after season.

The Propspeed system is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, pod drives, sail drives and other underwater metal.

In the kit:
1. Propclean
The denatured alcohol in Propclean ensures that the metal surface is now completely free of contaminants and ready for Propprep. The Propclean solution comes pre-packaged with 4 wipes in the kit to make your job easier.

2. Propprep
Propprep is critical in the chemical preparation of the metal surface to be coated. The Propprep solution comes pre-packaged with 2 wipes in the kit to make your job easier.

3a&b. Etching Primer Base & Hardener
This kit contains 2x 240ml Etching Primer Base and 2x 60ml Etching Primer Hardener. The Etching Primer is the origin of the radiant Propspeed Gold colour. Combined they are one of the best underwater Etching Primers on the market.
4. Clear Coat
This kit contains 320ml Clear Coat, a non-toxic topcoat which forms a super slick outer layer that marine growth cannot adhere to, improving speed and reducing fuel costs.

Coverage Guide:
1 x Propeller
• 119-142cm, or 47-56" in size.

2 x Propellers
• 79-117cm, or 31-46", in size.

Surface
• The Propspeed Large Kit will coat a surface of 3.4m2 / 36.6ft2.